How to use butane gas torch ？
How to use butane gas torch ?
Make sure the butane gas torch is turned off before installing on the cylinder.
(1) Screw type cylinder:
Connect the butane gas torch to the cylinder properly by pressing down and screwing it on the cylinder.
(2) Bayonet type cylinder:
Screw the adapter onto the butane gas torch. Then, connect the butane gas torch to the cylinder properly by pressing.
(1) Turn the adjustment screw counterclockwise. The butane gas will travel through the butane gas torch nozzle.
(2) Light the gas with an open flame (e.g. lighter or match) by applying the flame to the butane gas torch nozzle.
3.Turn off and Detach:
(1) Turn the adjustment screw clockwise until it stops. This will immediately extinguish the flame.
(2) Turn the connection part of the butane gas torch until it detaches from the gas cylinder.
(1) Cooking & Grilling:
It will taste better when cooking steak with the butane gas torch. Using the high heat with the butane gas torch until the steak turns brown to seal in the flavor.
(2) Starting charcoal:
Ignite the butane gas torch and hold the flame to the charcoal until the charcoal inside cavity turn white. It is the easier way to start charcoal with the butane gas torch.
You can buy and see butane gas torch\'s detail information in the following website link :
9F., No.637-1, Sec. 5, Chongxin Rd., Sanchong Dist.,
New Taipei City 24158, Taiwan
TEL: 886-2-2999-7299 FAX: 886-2-2999-7339
E-mail: firstname.lastname@example.org / email@example.com
Official website: http://www.a-hot.com.tw